OWATROL-OIL derusts, preserves and seals
Remove loose rust
Metal with thick layers of rust should be treated as follows: Apply OWATROL-OIL, which reaches the stuck rust layers due to its enormous creeping ability through the rust leaf. The curing of OWATROL-OIL leads to a solidification of the substrate and the loose rust can be easily removed or is repelled by the penetrated OWATROL-OIL. What remains is a saturated rust surface that is optimally prepared for further work.
OLD remains OLD
The principle of action of OWATROL-OIL makes it possible to preserve rusty metal in its actual condition. In this way, the fashionable trend of "rusty utensils" can be fully complied with. Rusty parts remain just as rusty - no more and no less. OWATROL-OIL penetrates the rust pores and displaces air and moisture. The OIL dries, closes the pores so that no new moisture can penetrate. The result: rust process stopped! In addition, weathered/corroded sheet metal, aluminum or lead can be preserved in their as-is condition. The maximum creep ability prevents film formation on the surface with the effect that ALT remains ALT.
Painting metal transparently or in color
Adhering paint to rusty metal is something many people think is impossible. But with OWATROL-OIL, this problem is no longer a problem. Thanks to optimal wetting of the rusty substrate and filling of the porous rust down to the healthy metal, the bridge to the following paint coat is formed. The rust process is stopped and a permanently beautiful appearance is achieved.
As a leaf rust remover, rust preservative and rust sealer.
- Very effective, even where application with a brush is very difficult
- Transparent and thus inspection-capable rust protection possible
- Prevention of layer thickness build-up due to natural weathering
- Maximum creep to sound metal
- Displaces air and moisture from rust
- Optimum preparation for 1-K coatings
- Ideal: Owatrol Oil in the 300 ml spray can
Yield: 8 - 18 sqm/liter